NOTE: Error codes greater than 900 only occur when you try to connect
to RRAS (Routing and Remote Access Server) that is running Windows
2000 or later.
Error D e s c r i p t i o n
601 The port handle is invalid.
602 The port is already open.
603 Caller's buffer is too small.
604 Wrong information specified.
605 Cannot set port information.
606 The port is not connected.
607 The event is invalid.
608 The device does not exist.
609 The device type does not exist.
610 The buffer is invalid.
611 The route is not available.
612 The route is not allocated.
613 Invalid compression specified.
614 Out of buffers.
615 The port was not found.
616 An asynchronous request is pending.
617 The port or device is already disconnecting.
618 The port is not open.
619 The port is disconnected.
620 There are no endpoints.
621 Cannot open the phone book file.
622 Cannot load the phone book file.
623 Cannot find the phone book entry.
624 Cannot write the phone book file.
625 Invalid information found in the phone book.
626 Cannot load a string.
627 Cannot find key.
628 The port was disconnected.
629 The port was disconnected by the remote machine.
630 The port was disconnected due to hardware failure.
631 The port was disconnected by the user.
632 The structure size is incorrect.
633 The port is already in use or is not configured for Remote Access dialout.
634 Cannot register your computer on the remote network.
635 Unknown error.
636 The wrong device is attached to the port.
637 The string could not be converted.
638 The request has timed out.
639 No asynchronous net available.
640 A NetBIOS error has occurred.
641 The server cannot allocate NetBIOS resources needed to support the client.
642 One of your NetBIOS names is already registered on the remote network.
643 A network adapter at the server failed.
644 You will not receive network message popups.
645 Internal authentication error.
646 The account is not permitted to log on at this time of day.
647 The account is disabled.
648 The password has expired.
649 The account does not have Remote Access permission.
650 The Remote Access server is not responding.
651 Your modem (or other connecting device) has reported an error.
652 Unrecognized response from the device.
653 A macro required by the device was not found in the device .INF file section.
654 A command or response in the device .INF file section refers to an undefined macro
655 The <message> macro was not found in the device .INF file section.
656 The <defaultoff> macro in the device .INF file section contains an undefined macro
657 The device .INF file could not be opened.
658 The device name in the device .INF or media .INI file is too long.
659 The media .INI file refers to an unknown device name.
660 The device .INF file contains no responses for the command.
661 The device .INF file is missing a command.
662 Attempted to set a macro not listed in device .INF file section.
663 The media .INI file refers to an unknown device type.
664 Cannot allocate memory.
665 The port is not configured for Remote Access.
666 Your modem (or other connecting device) is not functioning.
667 Cannot read the media .INI file.
668 The connection dropped.
669 The usage parameter in the media .INI file is invalid.
670 Cannot read the section name from the media .INI file.
671 Cannot read the device type from the media .INI file.
672 Cannot read the device name from the media .INI file.
673 Cannot read the usage from the media .INI file.
674 Cannot read the maximum connection BPS rate from the media .INI file.
675 Cannot read the maximum carrier BPS rate from the media .INI file.
676 The line is busy.
677 A person answered instead of a modem.
678 There is no answer.
679 Cannot detect carrier.
680 There is no dial tone.
681 General error reported by device.
682 ERROR WRITING SECTIONNAME
683 ERROR WRITING DEVICETYPE
684 ERROR WRITING DEVICENAME
685 ERROR WRITING MAXCONNECTBPS
686 ERROR WRITING MAXCARRIERBPS
687 ERROR WRITING USAGE
688 ERROR WRITING DEFAULTOFF
689 ERROR READING DEFAULTOFF
690 ERROR EMPTY INI FILE
691 Access denied because username and/or password is invalid on the domain.
692 Hardware failure in port or attached device.
693 ERROR NOT BINARY MACRO
694 ERROR DCB NOT FOUND
695 ERROR STATE MACHINES NOT STARTED
696 ERROR STATE MACHINES ALREADY STARTED
697 ERROR PARTIAL RESPONSE LOOPING
698 A response keyname in the device .INF file is not in the expected format.
699 The device response caused buffer overflow.
700 The expanded command in the device .INF file is too long.
701 The device moved to a BPS rate not supported by the COM driver.
702 Device response received when none expected.
703 ERROR INTERACTIVE MODE
704 ERROR BAD CALLBACK NUMBER
705 ERROR INVALID AUTH STATE
706 ERROR WRITING INITBPS
707 X.25 diagnostic indication.
708 The account has expired.
709 Error changing password on domain.
710 Serial overrun errors were detected while communicating with your modem.
711 RasMan initialization failure. Check the event log.
712 Biplex port is initializing. Wait a few seconds and redial.
713 No active ISDN lines are available.
714 Not enough ISDN channels are available to make the call.
715 Too many errors occurred because of poor phone line quality.
716 The Remote Access IP configuration is unusable.
717 No IP addresses are available in the static pool of Remote Access IP addresses.
718 PPP timeout.
719 PPP terminated by remote machine.
720 No PPP control protocols configured.
721 Remote PPP peer is not responding.
722 The PPP packet is invalid.
723 The phone number, including prefix and suffix, is too long.
724 The IPX protocol cannot dial-out on the port because the computer is an IPX router.
725 The IPX protocol cannot dial-in on the port because the IPX router is not installed.
726 The IPX protocol cannot be used for dial-out on more than one port at a time.
727 Cannot access TCPCFG.DLL.
728 Cannot find an IP adapter bound to Remote Access.
729 SLIP cannot be used unless the IP protocol is installed.
730 Computer registration is not complete.
731 The protocol is not configured.
732 The PPP negotiation is not converging.
733 The PPP control protocol for this network protocol is not available on the server.
734 The PPP link control protocol terminated..
735 The requested address was rejected by the server..
736 The remote computer terminated the control protocol.
737 Loopback detected..
738 The server did not assign an address.
739 The remote server cannot use the Windows NT encrypted password.
740 The TAPI devices configured for Remote Access failed to initialize or were not installed correctly.
741 The local computer does not support encryption.
742 The remote server does not support encryption.
743 The remote server requires encryption.
744 Cannot use the IPX net number assigned by the remote server. Check the event log.
745 ERROR_INVALID_SMM
746 ERROR_SMM_UNINITIALIZED
747 ERROR_NO_MAC_FOR_PORT
748 ERROR_SMM_TIMEOUT
749 ERROR_BAD_PHONE_NUMBER
750 ERROR_WRONG_MODULE
751 The callback number contains an invalid character. Only the following 18 characters are allowed: 0 to 9, T, P, W, (, ), -, @, and space
752 A syntax error was encountered while processing a script.
753 The connection could not be disconnected because it was created by the multi-protocol router.
754 The system could not find the multi-link bundle.
755 The system cannot perform automated dial because this connection has a custom dialer specified.
756 This connection is already being dialed.
757 Remote Access Services could not be started automatically. Additional information is provided in the event log.
758 Internet Connection Sharing is already enabled on the connection.
759 An error occurred while the existing Internet Connection Sharing settings were being changed.
760 An error occurred while routing capabilities were being enabled.
761 An error occurred while Internet Connection Sharing was being enabled for the connection.
762 An error occurred while the local network was being configured for sharing.
763 Internet Connection Sharing cannot be enabled. There is more than one LAN connection other than the connection to be shared.
764 No smart card reader is installed.
765 Internet Connection Sharing cannot be enabled. A LAN connection is already configured with the IP address that is required for automatic IP addressing.
766 A certificate could not be found. Connections that use the L2TP protocol over IPSec require the installation of a machine certificate, also known as a computer certificate.
767 Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network has more than one IP address configured. Please reconfigure the LAN connection with a single IP address before enabling Internet Connection Sharing.
768 The connection attempt failed because of failure to encrypt data.
769 The specified destination is not reachable.
770 The remote computer rejected the connection attempt.
771 The connection attempt failed because the network is busy.
772 The remote computer's network hardware is incompatible with the type of call requested.
773 The connection attempt failed because the destination number has changed.
774 The connection attempt failed because of a temporary failure. Try connecting again.
775 The call was blocked by the remote computer.
776 The call could not be connected because the remote computer has invoked the Do Not Disturb feature.
777 The connection attempt failed because the modem (or other connecting device on the remote computer is out of order.
778 It was not possible to verify the identity of the server.
779 To dial out using this connection you must use a smart card.
780 An attempted function is not valid for this connection.
781 The connection requires a certificate, and no valid certificate was found. For further assistance, click More Info or search Help and Support Center for this error number.
782 Internet Connection Sharing (ICS and Internet Connection Firewall (ICF cannot be enabled because Routing and Remote Access has been enabled on this computer. To enable ICS or ICF, first disable Routing and Remote Access. For more information about Routing and Remote Access, ICS, or ICF, see Help and Support.
783 Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network is either not present, or is disconnected from the network. Please ensure that the LAN adapter is connected before enabling Internet Connection Sharing.
784 You cannot dial using this connection at logon time, because it is configured to use a user name different than the one on the smart card. If you want to use it at logon time, you must configure it to use the user name on the smart card.
785 You cannot dial using this connection at logon time, because it is not configured to use a smart card. If you want to use it at logon time, you must edit the properties of this connection so that it uses a smart card.
786 The L2TP connection attempt failed because there is no valid machine certificate on your computer for security authentication.
787 The L2TP connection attempt failed because the security layer could not authenticate the remote computer.
788 The L2TP connection attempt failed because the security layer could not negotiate compatible parameters with the remote computer.
789 The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer.
790 The L2TP connection attempt failed because certificate validation on the remote computer failed.
791 The L2TP connection attempt failed because security policy for the connection was not found.
792 The L2TP connection attempt failed because security negotiation timed out.
793 The L2TP connection attempt failed because an error occurred while negotiating security.
794 The Framed Protocol RADIUS attribute for this user is not PPP.
795 The Tunnel Type RADIUS attribute for this user is not correct.
796 The Service Type RADIUS attribute for this user is neither Framed nor Callback Framed.
797 A connection to the remote computer could not be established because the modem was not found or was busy. For further assistance, click More Info or search Help and Support Center for this error number.
798 A certificate could not be found that can be used with this Extensible Authentication Protocol.
799 Internet Connection Sharing (ICS cannot be enabled due to an IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1. Please ensure that no other client on the network is configured to use 192.168.0.1. 800 Unable to establish the VPN connection. The VPN server may be
unreachable, or security parameters may not be configured properly for this connection.
801 This connection is configured to validate the identity of the access server, but Windows cannot verify the digital certificate sent by the server.
802 The card supplied was not recognized. Please check that the card
is inserted correctly, and fits tightly.
803 The PEAP configuration stored in the session cookie does not match the current session configuration.
804 The PEAP identity stored in the session cookie does not match the current identity.
805 You cannot dial using this connection at logon time, because it is configured to use logged on user's credentials.
900 The router is not running.
901 The interface is already connected.
902 The specified protocol identifier is not known to the router.
903 The Demand-dial Interface Manager is not running.
904 An interface with this name is already registered with the router.
905 An interface with this name is not registered with the router.
906 The interface is not connected.
907 The specified protocol is stopping.
908 The interface is connected and hence cannot be deleted.
909 The interface credentials have not been set.
910 This interface is already in the process of connecting.
911 An update of routing information on this interface is already in progress.
912 The interface configuration in invalid. There is already another interface that is connected to the same interface on the remote router.
913 A Remote Access Client attempted to connect over a port that was reserved for Routers only.
914 A Demand Dial Router attempted to connect over a port that was reserved for Remote Access Clients only.
915 The client interface with this name already exists and is currently connected.
916 The interface is in a disabled state.
917 The authentication protocol was rejected by the remote peer.
918 There are no authentication protocols available for use.
919 The remote computer refused to be authenticated using the
configured authentication protocol. The line has been disconnected.
920 The remote account does not have Remote Access permission.
921 The remote account has expired.
922 The remote account is disabled.
923 The remote account is not permitted to logon at this time of day.
924 Access was denied to the remote peer because username and/or password is invalid on the domain.
925 There are no routing enabled ports available for use by this demand dial interface.
926 The port has been disconnected due to inactivity.
927 The interface is not reachable at this time.
928 The Demand Dial service is in a paused state.
929 The interface has been disconnected by the administrator.
930 The authentication server did not respond to authentication requests in a timely fashion.
931 The maximum number of ports allowed for use in the multilinked connection has been reached.
932 The connection time limit for the user has been reached.
933 The maximum limit on the number of LAN interfaces supported has been reached.
934 The maximum limit on the number of Demand Dial interfaces supported has been reached.
935 The maximum limit on the number of Remote Access clients supported has been reached.
936 The port has been disconnected due to the BAP policy.
937 Because another connection of your type is in use, the incoming connection cannot accept your connection request.
938 No RADIUS servers were located on the network.
939 An invalid response was received from the RADIUS authentication server. Make sure that the case sensitive secret password for the RADIUS server is set correctly.
940 You do not have permission to connect at this time.
941 You do not have permission to connect using the current device type.
942 You do not have permission to connect using the selected authentication protocol.
943 BAP is required for this user.
944 The interface is not allowed to connect at this time.
945 The saved router configuration is incompatible with the current router.
946 RemoteAccess has detected older format user accounts that will not be migrated automatically. To migrate these manually, run XXXX.
948 The transport is already installed with the router.
949 Received invalid signature length in packet from RADIUS server.
950 Received invalid signature in packet from RADIUS server.
951 Did not receive signature along with EAPMessage from RADIUS server.
952 Received packet with invalid length or Id from RADIUS server.
953 Received packet with attribute with invalid length from RADIUS server.
954 Received invalid packet from RADIUS server.
955 Authenticator does not match in packet from RADIUS server.
Saturday, November 20, 2010
Useful XP Commands
Accessibility Controls = access.cpl
Add Hardware Wizard = hdwwiz.cpl
Add/Remove Programs = appwiz.cpl
Administrative Tools = control admintools
Automatic Updates = wuaucpl.cpl
Bluetooth Transfer Wizard = fsquirt
Calculator = calc
Certificate Manager = certmgr.msc
Character Map = charmap
Check Disk Utility = chkdsk
Clipboard Viewer = clipbrd
Command Prompt = cmd
Component Services = dcomcnfg
Computer Management = compmgmt.msc
Date and Time Properties = timedate.cpl
DDE Shares = ddeshare
Device Manager = devmgmt.msc
Direct X Control Panel (If Installed)* = directx.cpl
Direct X Troubleshooter = dxdiag
Disk Cleanup Utility = cleanmgr
Disk Defragment = dfrg.msc
Disk Management = diskmgmt.msc
Disk Partition Manager = diskpart
Display Properties = control desktop/desk.cpl
Dr. Watson System Troubleshooting Utility = drwtsn32
Driver Verifier Utility = verifier
Event Viewer = eventvwr.msc
File Signature Verification Tool = sigverif
Findfast = findfast.cpl
Folders Properties = control folders
Fonts = control fonts
Fonts Folder = fonts
Free Cell Card Game = freecell
Game Controllers = joy.cpl
Group Policy Editor (XP Prof) = gpedit.msc
Hearts Card Game = mshearts
Iexpress Wizard = iexpress
Indexing Service = ciadv.msc
Internet Properties = inetcpl.cpl
IP Configuration = ipconfig
Java Control Panel (If Installed) = jpicpl32.cpl
Java Application Cache Viewer (If Installed) = javaws
Keyboard Properties = control keyboard
Local Security Settings = secpol.msc
Local Users and Groups = lusrmgr.msc
Logs You Out Of Windows = logoff
M*cro$oft Chat = winchat
Minesweeper Game = winmine
Mouse Properties = control mouse
Mouse Properties = main.cpl
Network Connections = control netconnections
Network Connections = ncpa.cpl
Network Setup Wizard = netsetup.cpl
Notepad = notepad
Nview Desktop Manager (If Installed) = nvtuicpl.cpl
Object Packager = packager
ODBC Data Source Administrator = odbccp32.cpl
On Screen Keyboard = osk
Opens AC3 Filter (If Installed) = ac3filter.cpl
Password Properties = password.cpl
Performance Monitor = perfmon.msc
Performance Monitor = perfmon
Phone and Modem Options = telephon.cpl
Power Configuration = powercfg.cpl
Printers and Faxes = control printers
Printers Folder = printers
Private Character Editor = eudcedit
Quicktime (If Installed) = QuickTime.cpl
Regional Settings = intl.cpl
Registry Editor = regedit
Registry Editor = regedit32
Remote Desktop = mstsc
Removable Storage = ntmsmgr.msc
Removable Storage Operator Requests = ntmsoprq.msc
Resultant Set of Policy (XP Prof) = rsop.msc
Scanners and Cameras = sticpl.cpl
Scheduled Tasks = control schedtasks
Security Center = wscui.cpl
Services = services.msc
Shared Folders = fsmgmt.msc
Shuts Down Windows = shutdown
Sounds and Audio = mmsys.cpl
Spider Solitare Card Game = spider
SQL Client Configuration = cliconfg
System Configuration Editor = sysedit
System Configuration Utility = msconfig
System File Checker Utility = sfc
System Properties = sysdm.cpl
Task Manager = taskmgr
Telnet Client = telnet
User Account Management = nusrmgr.cpl
Utility Manager = utilman
Windows Firewall = firewall.cpl
Windows Magnifier = magnify
Windows Management Infrastructure = wmimgmt.msc
Windows System Security Tool = syskey
Windows Update Launches = wupdmgr
Windows XP Tour Wizard = tourstart
Wordpad = write
Add Hardware Wizard = hdwwiz.cpl
Add/Remove Programs = appwiz.cpl
Administrative Tools = control admintools
Automatic Updates = wuaucpl.cpl
Bluetooth Transfer Wizard = fsquirt
Calculator = calc
Certificate Manager = certmgr.msc
Character Map = charmap
Check Disk Utility = chkdsk
Clipboard Viewer = clipbrd
Command Prompt = cmd
Component Services = dcomcnfg
Computer Management = compmgmt.msc
Date and Time Properties = timedate.cpl
DDE Shares = ddeshare
Device Manager = devmgmt.msc
Direct X Control Panel (If Installed)* = directx.cpl
Direct X Troubleshooter = dxdiag
Disk Cleanup Utility = cleanmgr
Disk Defragment = dfrg.msc
Disk Management = diskmgmt.msc
Disk Partition Manager = diskpart
Display Properties = control desktop/desk.cpl
Dr. Watson System Troubleshooting Utility = drwtsn32
Driver Verifier Utility = verifier
Event Viewer = eventvwr.msc
File Signature Verification Tool = sigverif
Findfast = findfast.cpl
Folders Properties = control folders
Fonts = control fonts
Fonts Folder = fonts
Free Cell Card Game = freecell
Game Controllers = joy.cpl
Group Policy Editor (XP Prof) = gpedit.msc
Hearts Card Game = mshearts
Iexpress Wizard = iexpress
Indexing Service = ciadv.msc
Internet Properties = inetcpl.cpl
IP Configuration = ipconfig
Java Control Panel (If Installed) = jpicpl32.cpl
Java Application Cache Viewer (If Installed) = javaws
Keyboard Properties = control keyboard
Local Security Settings = secpol.msc
Local Users and Groups = lusrmgr.msc
Logs You Out Of Windows = logoff
M*cro$oft Chat = winchat
Minesweeper Game = winmine
Mouse Properties = control mouse
Mouse Properties = main.cpl
Network Connections = control netconnections
Network Connections = ncpa.cpl
Network Setup Wizard = netsetup.cpl
Notepad = notepad
Nview Desktop Manager (If Installed) = nvtuicpl.cpl
Object Packager = packager
ODBC Data Source Administrator = odbccp32.cpl
On Screen Keyboard = osk
Opens AC3 Filter (If Installed) = ac3filter.cpl
Password Properties = password.cpl
Performance Monitor = perfmon.msc
Performance Monitor = perfmon
Phone and Modem Options = telephon.cpl
Power Configuration = powercfg.cpl
Printers and Faxes = control printers
Printers Folder = printers
Private Character Editor = eudcedit
Quicktime (If Installed) = QuickTime.cpl
Regional Settings = intl.cpl
Registry Editor = regedit
Registry Editor = regedit32
Remote Desktop = mstsc
Removable Storage = ntmsmgr.msc
Removable Storage Operator Requests = ntmsoprq.msc
Resultant Set of Policy (XP Prof) = rsop.msc
Scanners and Cameras = sticpl.cpl
Scheduled Tasks = control schedtasks
Security Center = wscui.cpl
Services = services.msc
Shared Folders = fsmgmt.msc
Shuts Down Windows = shutdown
Sounds and Audio = mmsys.cpl
Spider Solitare Card Game = spider
SQL Client Configuration = cliconfg
System Configuration Editor = sysedit
System Configuration Utility = msconfig
System File Checker Utility = sfc
System Properties = sysdm.cpl
Task Manager = taskmgr
Telnet Client = telnet
User Account Management = nusrmgr.cpl
Utility Manager = utilman
Windows Firewall = firewall.cpl
Windows Magnifier = magnify
Windows Management Infrastructure = wmimgmt.msc
Windows System Security Tool = syskey
Windows Update Launches = wupdmgr
Windows XP Tour Wizard = tourstart
Wordpad = write
Saturday, November 6, 2010
How To Generate SSL Key, CSR certificate For Apache.
1. [root@abc:~]# openssl --help
This command is used to see whether OPENSSL is installed /not in the server.2. First, generate a private key on the Linux server that runs Apache webserver using openssl command as shown below
[root@abc:~]# openssl genrsa -des3 -out domain name.key 1024/2048 Generating RSA private key, 1024/2048 bit long modulus .......................................++++++ ...................................................++++++ e is 73547 (0x01001) Enter pass phrase for www.thegeekstuff.com.key: Verifying - Enter pass phrase for doamin name.key: [root@abc:~]# ls -ltr domaim name.* -rw-r--r-- 1 root root 963 Jun 13 20:26 domaim name.key The generated private key looks like the following. [root@abc:~] cat domain name.key -----BEGIN RSA PRIVATE KEY----- Proc-Type: 4,ENCRYPTED DEK-Info: DES-EDE3-CBC,485B3C6371C9916E ymehJu/RowzrclMcixAyxdbfzQphfUAk9oK9kK2 jadfoiyqthakLKNqw9z1MoaqkPyqeHevUm26no AJKIETHKJADFS2BGb0n61/Ksk8isp7evLM4+QY KAQETKjdiahteksMJOjXLq+vf5Ra299fZPON7yr -----END RSA PRIVATE KEY-----
3. Generate a Certificate Signing Request (CSR) Using the key generate above, you should generate a (csr) using openssl,
[root@abc:~]# openssl req -new -key doamin name.key -out domain name.csr Enter pass phrase for domain name.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [GB]:XX State or Province Name (full name) [Berkshire]:XYZ Locality Name (eg, city) [Newbury]:ABC Organization Name (eg, company) [My Company Ltd]:ABCDEF Organizational Unit Name (eg, section) []:IT Common Name (eg, your name or your server's hostname) []: XYZXYZ Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: [root@abc:~]# ls -ltr domain name.* -rw-r--r-- 1 root root 963 Jun 13 20:26 domain name.key -rw-r--r-- 1 root root 664 Jun 13 20:35 domain name.csr
4. To verify the contents of CSR use the below command, [root@abc:~]# openssl -noout -text -in domain name.csr These are the steps to generate SSL Key, CSR Certificate For Apache.
Subscribe to:
Posts (Atom)